Welcome to my 1998 Acura Integra Type R OEM HID Retrofit!

If you have any questions or need help please check out http://www.hidplanet.com.



  Introduction
  Tools & Materials
  Step #1 Bumper Removal
  Step #2 Headlight Removal
  Step #3 Headlight Disassembly
  Step #4 Cutting Projector
  Step #5 Drill Mounts
  Step #6 Reassembly
  Step #7 Wiring & Mounting
  Step #8 Cleaning Up

TOOLS AND MATERIALS
--------------------
- Dremel
- Sanding Drums
- Cutting Blades
- Drill with 1/4" Drillbit
- Wirecutters/strippers
- (2) 20A Fuses

- (8) 1/4" bolts (Long bolts) / Locknuts
- Handful of 1/4" Washers
- 1/4" x x035 Round Aluminum (R/C Car Exhaust Piping)
- Electrical Tape
- Heat Gun
- Soldering Iron / Solder
- Shrink Wrap
- High Temperature Black Silicone
- All Clear Purpose Seatant
- Toolbox with Various tools

It is strongly suggested that you have an extra set of hands to help you out with this swap and make sure you have a lot of free time. Don't attempt if you are limited on type (like a single afternoon). You will most likely only have one set of headlights and you can't drive in the dark without headlights so give yourself a lot of time!


Next Step -> Bumper Removal

Copyright © 2003-2008 hidmod.com