Welcome to my 1998 Acura Integra Type R OEM HID Retrofit!

If you have any questions or need help please check out http://www.hidplanet.com.

  Tools & Materials
  Step #1 Bumper Removal
  Step #2 Headlight Removal
  Step #3 Headlight Disassembly
  Step #4 Cutting Projector
  Step #5 Drill Mounts
  Step #6 Reassembly
  Step #7 Wiring & Mounting
  Step #8 Cleaning Up

Step #8 - Putting Everything Back Together

- Reattach the headlight assembly.
- Reattach bumper.
- Hook up the HID connector to the back of the housing.
- Reattach negative battery terminal.
- Replace OEM 10A fuses with the 20A fuses for the Left Low Beam and Right Low Beam headlights. The fuse box
  is located right above your gas release handle labeled FUSE.
- Turn on your headlights and enjoy!

Note: It is highly recommended that you adjust your headlights correctly. Don't go around blinding people! If you
need aiming instructions, check this website: http://www.autooptiks.com/aiming.html.

Note: You can also seal up the back of the headlight housing a little bit better with silicone or something, I was just too
lazy so I left it like that. I haven't experienced any condensation yet so I think it's fine.

Congratulations, now make sure you clean everything up and enjoy your newly retrofitted Audi A6 HID lights! If you have
any further question pertaining to this retrofit, you can browse over to
hidplanet.com and ask your question there!


Copyright © 2003-2008 hidmod.com