Welcome to my 1998 Acura Integra Type R OEM HID Retrofit!

If you have any questions or need help please check out http://www.hidplanet.com.



  Introduction
  Tools & Materials
  Step #1 Bumper Removal
  Step #2 Headlight Removal
  Step #3 Headlight Disassembly
  Step #4 Cutting Projector
  Step #5 Drill Mounts
  Step #6 Reassembly
  Step #7 Wiring & Mounting
  Step #8 Cleaning Up

Step #4 - Cutting Stock Projector Housing
--------------------
- Now that you have just a bare bracket, use your dremel and cutting blade and start to cut at the bottom of the housing all the way around the base of the lowbeam bracket. Make sure you get as close as possible to the bracket and make sure you cut evenly.
- You must also cut the two vertical beams that are at perpendicular to the lowbeam bracket.





- Once you have removed your stock projector housing, flip it over and cut the corner out of the raised
  square block that holds the aiming screw. Make sure you make the corner big enough for a 1/4" bolt,
  and make sure you don't cut past the white plastic tab!



Next Step -> Drill Mounts

Copyright © 2003-2008 hidmod.com