Welcome to my 1998 Acura Integra Type R OEM HID Retrofit!

If you have any questions or need help please check out http://www.hidplanet.com.



  Introduction
  Tools & Materials
  Step #1 Bumper Removal
  Step #2 Headlight Removal
  Step #3 Headlight Disassembly
  Step #4 Cutting Projector
  Step #5 Drill Mounts
  Step #6 Reassembly
  Step #7 Wiring & Mounting
  Step #8 Cleaning Up

Step #1 - Bumper Removal
--------------------
-
Remove 9 black screws lining the top of the bumper with a philips head screwdriver.
- Remove the 2 bolts on the left of the black strip and then ther other 2 on the right.
- Remove the 2 bolts underneath the car that holds the bottom of the bumper to the undercarriage.
- Remove the 2 screws that hold on the ITR lip (two on each side).
- Remove the screw that is right above the screws for the lip (holds the bumper to the fender).
- Remove your turn signals (don't forget about the bulbs)..
- Pull the bumper off each fender carefully. There are a few plastic tabsholding it into place.
- Carefully place bumper in a safe place.



If you need further instructions on removing the bumper please get a Helm's manual (www.helmsinc.com).

Next Step -> Headlight Removal

Copyright © 2003-2008 hidmod.com